[ 0.774653] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.774656] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.775218] Fixed MDIO Bus: probed
[ 0.775247] PPP generic driver version 2.4.2
[ 0.775333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.775588] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.775592] alloc irq_desc for 21 on node -1
[ 0.775594] alloc kstat_irqs on node -1
[ 0.775600] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.775610] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.775613] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.775646] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.775668] ehci_hcd 0000:00:02.1: debug port 1
[ 0.775672] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.775684] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[ 0.784016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.784087] usb usb1: configuration #1 chosen from 1 choice
[ 0.784112] hub 1-0:1.0: USB hub found
[ 0.784120] hub 1-0:1.0: 10 ports detected
[ 0.784167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.784422] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.784425] alloc irq_desc for 20 on node -1
[ 0.784426] alloc kstat_irqs on node -1
[ 0.784432] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.784439] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.784442] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.784468] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.784486] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd3104000
[ 0.842056] usb usb2: configuration #1 chosen from 1 choice
[ 0.842077] hub 2-0:1.0: USB hub found
[ 0.842084] hub 2-0:1.0: 10 ports detected
[ 0.842126] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.842212] PNP: No PS/2 controller found. Probing ports directly.
[ 0.845022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.845027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.845073] mice: PS/2 mouse device common for all mice
[ 0.845152] rtc_cmos 00:04: RTC can wake from S4
[ 0.845184] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.845206] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.845295] device-mapper: uevent: version 1.0.3
[ 0.845383] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com[ 0.845453] device-mapper: multipath: version 1.1.0 loaded
[ 0.845456] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.845576] EISA: Probing bus 0 at eisa.0
[ 0.845587] Cannot allocate resource for EISA slot 4
[ 0.845597] EISA: Detected 0 cards.
[ 0.845637] cpuidle: using governor ladder
[ 0.845639] cpuidle: using governor menu
[ 0.846071] TCP cubic registered
[ 0.846206] NET: Registered protocol family 10
[ 0.846571] lo: Disabled Privacy Extensions
[ 0.846831] NET: Registered protocol family 17
[ 0.846849] Bluetooth: L2CAP ver 2.13
[ 0.846850] Bluetooth: L2CAP socket layer initialized
[ 0.846853] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.846854] Bluetooth: SCO socket layer initialized
[ 0.846877] Bluetooth: RFCOMM TTY layer initialized
[ 0.846880] Bluetooth: RFCOMM socket layer initialized
[ 0.846881] Bluetooth: RFCOMM ver 1.11
[ 0.846894] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
[ 0.846935] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
[ 0.846937] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
[ 0.846940] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 0.846942] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 0.846974] Using IPI No-Shortcut mode
[ 0.847027] PM: Resume from disk failed.
[ 0.847038] registered taskstats version 1
[ 0.847164] Magic number: 6:422:26
[ 0.847250] rtc_cmos 00:04: setting system clock to 2010-04-16 12:00:44 UTC (1271419244)
[ 0.847253] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.847255] EDD information not available.
[ 1.049565] ata5.00: ATA-6: WDC WD1600JB-22GVA0, 08.02D08, max UDMA/100
[ 1.049568] ata5.00: 312581808 sectors, multi 1: LBA48
[ 1.049590] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
[ 1.065472] ata5.00: configured for UDMA/100
[ 1.084022] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.084053] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.264021] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.396019] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.398499] usb 1-5: configuration #1 chosen from 1 choice
[ 1.700015] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 1.708021] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.708119] scsi 4:0:0:0: Direct-Access ATA WDC WD1600JB-22G 08.0 PQ: 0 ANSI: 5
[ 1.708207] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 1.708241] sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.708281] sd 4:0:0:0: [sda] Write Protect is off
[ 1.708284] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.708304] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.708406] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.762095] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.872323] ata6.00: ATAPI: TOSHIBA DVD-ROM SD-R1202, 1030, max UDMA/33
[ 1.872345] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13)
[ 1.888288] ata6.00: configured for UDMA/33
[ 1.894149] scsi 5:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1202 1030 PQ: 0 ANSI: 5
[ 1.901736] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.901739] Uniform CD-ROM driver Revision: 3.20
[ 1.901797] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.901840] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 1.901858] Freeing unused kernel memory: 540k freed
[ 1.902185] Write protecting the kernel text: 4580k
[ 1.902213] Write protecting the kernel read-only data: 1840k
[ 1.916106] usb 2-3: configuration #1 chosen from 1 choice
[ 1.920210] hub 2-3:1.0: USB hub found
[ 1.928028] hub 2-3:1.0: 4 ports detected
[ 2.019656] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.019940] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 2.019945] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 2.019950] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 2.019984] nv_probe: set workaround bit for reversed mac addr
[ 2.149051] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 2.149057] alloc irq_desc for 17 on node -1
[ 2.149060] alloc kstat_irqs on node -1
[ 2.149068] ohci1394 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 2.175980] Initializing USB Mass Storage driver...
[ 2.176082] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.176152] usbcore: registered new interface driver usb-storage
[ 2.176154] USB Mass Storage support registered.
[ 2.176700] usb-storage: device found at 4
[ 2.176702] usb-storage: waiting for device to settle before scanning
[ 2.206039] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d3000000-d30007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.276067] usb 2-4: new low speed USB device using ohci_hcd and address 3
[ 2.490112] usb 2-4: configuration #1 chosen from 1 choice
[ 2.498378] usbcore: registered new interface driver hiddev
[ 2.505302] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[ 2.505375] generic-usb 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4/input0
[ 2.505391] usbcore: registered new interface driver usbhid
[ 2.505393] usbhid: v2.6:USB HID core driver
[ 2.540804] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:
13:d4:bc:08:f2
[ 2.540809] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 2.576044] usb 2-3.1: new low speed USB device using ohci_hcd and address 4
[ 2.868093] usb 2-3.1: configuration #1 chosen from 1 choice
[ 2.892258] input: Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input4
[ 2.892318] generic-usb 0003:046D:C221.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:02.0-3.1/input0
[ 2.916077] input: Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.1/input/input5
[ 2.916167] generic-usb 0003:046D:C221.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:02.0-3.1/input1
[ 3.103350] usb 2-3.4: new full speed USB device using ohci_hcd and address 5
[ 3.249114] usb 2-3.4: configuration #1 chosen from 1 choice
[ 3.263115] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.4/2-3.4:1.0/input/input6
[ 3.263206] generic-usb 0003:046D:C222.0004: input,hiddev97,hidraw3: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:02.0-3.4/input0
[ 3.469239] PM: Starting manual resume from disk
[ 3.469243] PM: Resume from partition 8:7
[ 3.469245] PM: Checking hibernation image.
[ 3.469384] PM: Resume from disk failed.
[ 3.472503] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 3.472508] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.481722] EXT4-fs (sda6): barriers enabled
[ 3.488111] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c01070043c7]
[ 4.121471] kjournald2 starting: pid 396, dev sda6:
commit interval 5 seconds
[ 4.121509] EXT4-fs (sda6): delayed allocation enabled
[ 4.121513] EXT4-fs: file extents enabled
[ 4.129806] EXT4-fs: mballoc enabled
[ 4.129823] EXT4-fs (sda6): recovery complete
[ 4.132003] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 4.713404] type=1505 audit(1271419248.364:2): operation="profile_load" pid=420 name=/usr/share/gdm/guest-session/Xsession
[ 4.715674] type=1505 audit(1271419248.364:3): operation="profile_load" pid=421 name=/sbin/dhclient3
[ 4.715942] type=1505 audit(1271419248.364:4): operation="profile_load" pid=421 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.716110] type=1505 audit(1271419248.368:5): operation="profile_load" pid=421 name=/usr/lib/connman/scripts/dhclient-script
[ 4.786929] type=1505 audit(1271419248.437:6): operation="profile_load" pid=422 name=/usr/bin/evince
[ 4.791456] type=1505 audit(1271419248.440:7): operation="profile_load" pid=422 name=/usr/bin/evince-previewer
[ 4.794160] type=1505 audit(1271419248.444:
: operation="profile_load" pid=422 name=/usr/bin/evince-thumbnailer
[ 4.815435] type=1505 audit(1271419248.464:9): operation="profile_load" pid=424 name=/usr/lib/cups/backend/cups-pdf
[ 4.815763] type=1505 audit(1271419248.464:10): operation="profile_load" pid=424 name=/usr/sbin/cupsd
[ 7.176257] usb-storage: device scan complete
[ 7.177982] scsi 6:0:0:0: Direct-Access SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 2 CCS
[ 7.178332] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.178963] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.179835] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.179838] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 7.179841] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.181835] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.181838] sdb: sdb1 sdb2
[ 7.184835] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.184838] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 12.299305] udev: starting version 147
[ 12.300667] Adding 3004112k swap on /dev/sda7. Priority:-1 extents:1 across:3004112k
[ 12.323580] lp: driver loaded but no devices found
[ 12.336509] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 12.336527] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 12.416225] EXT4-fs (sda6): internal journal on sda6:8
[ 12.662022] Linux agpgart interface v0.103
[ 12.764970] nvidia: module license 'NVIDIA' taints kernel.
[ 12.764974] Disabling lock debugging due to kernel taint
[ 13.033664] parport_pc 00:08: reported by Plug and Play ACPI
[ 13.033713] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.113101] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 13.113107] alloc irq_desc for 16 on node -1
[ 13.113109] alloc kstat_irqs on node -1
[ 13.113117] C-Media PCI 0000:05:06.0: PCI INT A -> Link[APC1] -> GSI 16 (leve
l, low) -> IRQ 16
[ 13.120851] lp0: using parport0 (interrupt-driven).
[ 13.179888] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.186284] ppdev: user-space parallel port driver
[ 13.271039] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 59659kHz
[ 13.512487] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 13.512494] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 13.512514] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 13.602512] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 13.602519] alloc irq_desc for 18 on node -1
[ 13.602522] alloc kstat_irqs on node -1
[ 13.602530] nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 13.602536] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.602767] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 13.647166] __ratelimit: 3 callbacks suppressed
[ 13.647170] type=1505 audit(1271419257.296:12): operation="profile_replace" pid=972 name=/usr/share/gdm/guest-session/Xsession
[ 13.648739] type=1505 audit(1271419257.300:13): operation="profile_replace" pid=973 name=/sbin/dhclient3
[ 13.649007] type=1505 audit(1271419257.300:14): operation="profile_replace" pid=973 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 13.649159] type=1505 audit(1271419257.300:15): operation="profile_replace" pid=973 name=/usr/lib/connman/scripts/dhclient-script
[ 13.654527] type=1505 audit(1271419257.304:16): operation="profile_replace" pid=974 name=/usr/bin/evince
[ 13.659111] type=1505 audit(1271419257.308:17): operation="profile_replace" pid=974 name=/usr/bin/evince-previewer
[ 13.662333] type=1505 audit(1271419257.312:18): operation="profile_replace" pid=974 name=/usr/bin/evince-thumbnailer
[ 13.667886] type=1505 audit(1271419257.316:19): operation="profile_replace" pid=976 name=/usr/lib/cups/backend/cups-pdf
[ 13.668246] type=1505 audit(1271419257.320:20): operation="profile_replace" pid=976 name=/usr/sbin/cupsd
[ 13.670464] type=1505 audit(1271419257.320:21): operation="profile_replace" pid=977 name=/usr/sbin/tcpdump
[ 13.836451] intel8x0_measure_ac97_clock: measured 55136 usecs (2704 samples)
[ 13.836455] intel8x0: clocking to 46980
[ 24.416017] eth0: no IPv6 routers present
[ 78.692028] Clocksource tsc unstable (delta = -272708223 ns)
[ 4365.957166] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 4366.091645] usb 1-2: configuration #1 chosen from 1 choice
[ 4366.097986] scsi7 : SCSI emulation for USB Mass Storage devices
[ 4366.128703] usb-storage: device found at 5
[ 4366.128709] usb-storage: waiting for device to settle before scanning
[ 4366.192583] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x170B
[ 4366.192618] usbcore: registered new interface driver usblp
[ 4367.245163] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 4371.128544] usb-storage: device scan complete
[ 4371.131150] scsi 7:0:0:0: Direct-Access Canon MP450Storage 0105 PQ: 0 ANSI: 2
[ 4371.131866] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 4371.160394] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 4472.222913] usb 1-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 4475.084388] usb 1-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 4476.105040] usb 1-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 6152.707391] usb 1-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 6155.217866] usb 1-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 6156.242055] usb 1-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
I hope this helps you guys to find the problem