Pages: [1]
  Print  
Author Topic: FreezeTag Server News  (Read 10070 times)
Fragjooski
Nub


Cakes 0
Posts: 13


« on: January 12, 2007, 11:27:31 AM »

Just wanted everyone to know that I have a temporary site up at http://oafreeze.game-host.org

There's some info on the servers running as well as a messageboard and stats.

Stats are currently for Server #2

Settings are TDM Freezetag - Instagib.  http download is enabled but must be set.

seta cl_wwwDownload 1

This can either be set in:

 ~/.openarena/baseoa/q3config.cfg

Or the easiest way is to open Open Arena, from your console (hit the ~ key) with

/seta cl_wwwDownload 1
/connect remitech.org:27961 (or oafreeze.game-host.org the first is just easier)

I have the server setup so that the mod willl download to ~/.openarena/freezedt and the maps will go to ~/.openarena/baseoa by default.
Downloads are smokin with http to say the least.  I'll have to put some more custom maps up soon.  Unfortunately, I can't play scandm1 without the game crashing.   :cry:

Sorry about the site looking like crap.  I'll update that later.  I've been up all night because of a lame ass haxor in one of my web servers...  =/
Always nice to find all of your dns records gone....
« Last Edit: January 12, 2007, 11:29:57 AM by Fragjooski » Logged
subnet_rx
Nub


Cakes 0
Posts: 14


WWW
« Reply #1 on: January 12, 2007, 04:53:51 PM »

Where can I find information on how this is played?
Logged

Fragjooski
Nub


Cakes 0
Posts: 13


« Reply #2 on: January 12, 2007, 08:59:47 PM »

The mod itself is Freeze.  This basically means that when you frag someone they actually freeze into an ice crystal.  To thaw your teammates you stand next to them for 3 seconds.  When one team freezes the other team, your team scores a point.  When 15 points are reached the match is over.  I think I also have a timelimit set to 20 minutes so in the event of a tie, there is a suddent death point.

The original readme file for the Open Source Freeze Tag is here:  (some commands are different in the modified freezedt mod I have on Server #2)  I'll explain those first.

In FreezeDT:  /hook_enable 1 is the command for hook, and there are a few extra settings for using the hook.

Also to use hook in openarena's console type /bind f +button5 (you can substitute f for mouse2 or whatever key you want to use for the hook).
or
bind f +button 5 //copy this into your q3config.cfg file under either baseoa to enable this key for any mod that has a hook or +button5 option

or

bind f +button 5 //copy this to q3config.cfg only in the freeze mod folders.

Just for the sake of continuity you really should have your config files stored in q3config.cfg under ~/.openarena/baseoa (or mod)
This is also good for server continuity.  Sometimes settings get stuck from using other paths.  Or if you run multiple game servers you might have one setting overriding another.  I'll write a lengthy article about running multiple servers and how to avoid config/server problems later.

//Hook Settings

//seta g_grapple "1"  //the original Freeze Server hook enable option

seta hook_enable "1"  //hook (grapple) is enabled on the server

seta hook_speed "1000"  //how fast the hook shoots from you to the wall

seta hook_speedpull "800"  //how fast the hook pulls you to the wall once it's attached

seta hook_delaytime "0"  //how long it takes for the hook to fire after hitting the key to fire it.

seta hook_holdtime "0"  //how long the hook will hold you onto a wall  --  This is sometimes enabled to keep people from camping

seta hook_damage "0"  //whether or not the hook causes damage when fired upon an opponent


********* Original Readme *******
====================

Freeze Tag 1.51b

for Quake3 1.30

by Darrell "Doolittle" Bircsak



Copy these files to C:\Program Files\Quake III Arena\freeze.  Your directory may be different.



Freeze Tag is a teamplay modification for Quake3 and Team Arena.  It is a lot like that game you may have played as a kid, but without the killing.  In Freeze Tag you try to eliminate the entire enemy team.  If you kill someone then they will become frozen.  So to eliminate all, you'd need to freeze everyone, making them all frozen at the same time.  This will give your team a point and the round will start over again.  If you are ever frozen, a teammate can come rescue you by standing next to your icy body for three seconds.  You'll then be set free and can join the battle again.



   Kill the enemy to freeze them

   Stand by a teammate for three seconds to unthaw them

   Freeze the entire enemy team to win

   Shoot an enemy opponent to "get their attention" and taunt

   Watch your back, patrol as a group

   Set traps, guard frozen enemy bodies

   While you camp your team may be getting slaughtered so make sure to save them

   You are a good player if you thaw more than one teammate at a time

   You are a great player if you are the last person alive and you perform a miraculous comeback, take out the other team and revive your teammates

   You are strategic if you only concentrate on thawing teammates; this kind of activity usually keeps a team alive

   You understand all things if you can balance this with killing the other team

   You are sneaky if you wait for enemies to come thaw their guys and then attack from the shadows

   You are fun to play with if you don't shoot the author

   For more info see http://www.planetquake.com/freeze



CLIENT



The only major new commands that have been added to Freeze Tag are "drop", "ready", and using the grapple with "+button5".  The server you are connected to must have doReady and g_grapple on for you to use them though.  If doReady is on then when a map starts, all players will need to type in "ready" at the console to begin the round.  If the grapple is turned on, you should bind a key to +button5 to be able to fire the grapple and sail around the rooms.  Do this by lowering the in-game console (press ~) and type "bind mouse2 +button5", but use whatever key you wish to assign this command to.  And with the "drop" command you can drop just about anything you're carrying:  weapons, ammo, holdable items.  This is so you can help teammates if you want.  (See next paragraph for example on how to automate this.)  Another good thing to do if you like helping unfreeze people is to turn on the team overlay so that you can know at all times where your teammates are.  This is done under the Game Options menu.  By helping a teammate unfreeze you will get a point.  These points are added to your normal score as well as shown individually to the far left on the scoreboard.  If you see an "L" near the help score, that means that person is the team leader.



An example freeze.cfg file is included.  To load this type "exec freeze.cfg" within the game console.  It is actually a complex script that allows you to drop items to share with teammates.  Once you hit the backspace key, you can press a number to drop that weapon and its ammo.  Hit backspace again to go back into normal weapon selection mode.



There is also a chase camera script in freeze.cfg.  Press 5 on the keypad to turn on the third person view.  Hit the keypad's up or down arrows to zoom in or out, and left or right to orbit the player.  The camera will remember your settings if you turn it off, by hitting 5 on the keypad again.



In Freeze you can also send voice messages to other players.  The voice commands are:



   yes

   no

   praise

   onfollow

   help

   helping



To use these, type in the console "vsay_team yes" for example.  This will play the voice "Affirmative" and also send out a text "Affirmative".  "vsay yes" would send to everyone in the game, not just teammates.  Another good one is "vtell_target onfollow", which would send "I'm following" to whomever your crosshairs are on.



cg_teamChatsOnly

cg_noVoiceChats

cg_noVoiceText

Use these settings to turn voices off accordingly.



SERVER



To run a server, it is recommended you use this command line:

   quake3 +set fs_game freeze +exec ft.config +set dedicated 2

For Team Arena it would be:

   quake3 +set fs_game freeze/missionpack +set fs_basegame missionpack +exec ft.config +set dedicated 2



This should load the ft.config settings for the game.  This text file is very important.  It tells Quake3 what we want all of our gameplay values to be.  Different values can radically effect how the modification plays.  Let's look at the example ft.config that should be included.



seta sv_hostname "Freeze Tag"

First it should be mentioned that setting dedicated to 2 means you want the entire world to know about your server.  This makes your server send its address information to a master server.  This master server is where players connect to see what server they'd like to join.  They should see Freeze Tag as your hostname.



seta g_motd "Happy Freezing!"

This is a message players see as the level is loading up.  It can say anything but keep it short.



seta sv_pure "0"

This setting is very important.  If you turn it on then it means that anyone wishing to play on your server will need to have the Freeze Tag .pk3 files or they will need to download them before joining.  This also means that any .pk3 files your server loads will be the only .pk3 files their computer loads.  This is actually a good thing.  It helps ensure that no cheating is going on.

With sv_pure set to "0", then anyone can join, even people that have never heard of Freeze Tag before.  Freeze Tag has been designed to be playable for these people.  They will not see the fancy white ice shells, but instead will see the Battle Suit effect.



seta g_gametype "3"

Currently sets the game to team deathmatch.  Setting to "4" would set it to CTF, etc.  Freeze Tag will only work with team deathmatch and CTF!



seta sv_maxclients "10"

Determines how many people total you want to allow to connect.  This setting is the single most important value as far as deciding server load.  Setting it high may result in decreased performance.



seta sv_privatePassword ""

seta sv_privateClients "0"

From the 10 player slots mentioned above, you can attach a password to any number of them.  Some servers use this if they have a busy server and would like to be able to join at any time.  If a server had nine players on it and privateClients was set to 1, then anyone wanting to join would need to type in the password to get that last player spot.  Sometimes this confuses people when they see that your server has spots open, but then try to connect and realize that those spots are reserved.



seta dmflags "0"

It's time to become confusing.  You like math, don't you?  This setting, considered to be the most important as far as gameplay is concerned, can set several different values.  The way to turn on certain values involves adding up numbers.  We do this so that we can represent several choices in one number!  It's a programming thing.  The choices are:



   No falling   8

   Fixed field of view   16

   No footsteps   32

   No item reset   64

   No team reset   128

   Weapons stay   256

   No playerclip   512

   Nightmare mode   1024



If you wanted your server to have no footsteps and no falling, you would add those numbers up.  32 and alien which would mean dmflags should be set to "40".  Want only no playerclip and nightmare mode?  512 and 1024 is dmflags "1536".

To explain each setting: (Cool no falling means you take no falling damage, (16) fixed field of view means players cannot change to that "fish-eye" display allowing them to see more to their left and right.

(32) No footsteps means what it says.

(64) No item reset, when used, means that when a team wins a round all the living players will not have their health and weapon ammo reset.  This would leave them at a disadvantage as the entire enemy team will be coming in fresh.

(128) No team reset means that when a round is won, only the losing team will be unfrozen.  The winning team still may have a few people that are frozen and that need to be saved.  This will also leave the winning team at a disadvantage conceivably.

(256) Weapons stay means what it says.

(512) No playerclip allows people to walk along those ledges and go on the roof of the original Quake3 maps without being stopped by some invisible wall.  An unfortunate side effect is that some see through floors may let you fall through them.

(1024) Nightmare mode is a special setting players had asked be put in.  It is basically hyper-Freeze Tag.  You can thaw people faster, there's a shorter max-time for being frozen, all weapons do mega-damage with lots of starting ammo.  It's Freeze on steroids.  Note that with weaponlimit (see below) set to 2048, the Gauntlet will not do super damage.



seta fraglimit "30"

seta timelimit "0"

seta capturelimit "8"

These values determine when a new map will be loaded.  A frag is a kill and a capture point is the team score.



seta rconPassword "none"

The rcon command allows people who know this password to kick players, change maps, and do various other administrative things.



seta g_friendlyFire "0"

Turn this on and you can damage teammates.  If you manage to kill them then they will just die, not freeze.



seta g_teamAutoJoin "1"

seta g_teamForceBalance "0"

When you join the game, AutoJoin will automatically assign you to a team.  ForceBalance will make it so that you cannot join a team that has more players than the other team.



seta g_warmup "20"

seta g_doWarmup "0"

When a new map starts, the game can do a warmup time, which is a countdown of twenty seconds here.  Set doWarmup to actually have it work on your server.  If you have the doReady command on (see below) then everyone will need to type in "ready" to actually start the warmup countdown.



seta g_log ""

If you want to log the game.  Note that when a person is thawed, this will be sent to the log as being the saving teammate killing the frozen player with MOD_UNKNOWN.  This was done to maintain compatibility with various log parsing programs.



seta g_password "none"

seta g_needpass "0"

You can set a password needed to play on the server.  Good for private clan matches.  Turn needpass on to activate.  This value also tells players who are looking for servers which servers are password-ed before they try to join.



seta g_banIPs ""

seta g_filterBan "1"

Servers can ban certain IPs from playing on their server.  You can use wildcards (*).  filterBan turns this setting on or off.



seta g_speed "320"

seta g_gravity "800"

seta g_knockback "1000"

These settings effect the physics of the game.  These are their default values.



seta g_quadfactor "3"

The amount of damage a player does when they have the quad powerup.



seta g_weaponrespawn "5"

seta g_weaponTeamRespawn "5"

The amount of time it takes before a weapon returns after being picked up.  This is not used if weaponstay for dmflags (mentioned above) is on.



seta g_forcerespawn "20"

seta g_inactivity "60"

The number is in seconds.  You can make someone automatically respawn if they haven't.  You can also have people kicked off of the server if they do not move for more than a minute.  These are good options.  Use them.



seta g_allowVote "1"

seta votelimit "50"

If you have allowVote on and you set up a value for votelimit, you can choose which voting options you want your players to be able to change.  The way this is set works much like dmflags where you add values together.



   map_restart   1

   nextmap   2

   map   4

   g_gametype   8

   kick   16

   clientkick   32

   g_doWarmup   64

   timelimit   128

   fraglimit   256

   g_grapple   512



The setting of "50" is nextmap, kick, and clientkick:  2, 16, and 32, which totals to 50.  (g_grapple will be mentioned below.)



seta bot_nochat "0"

seta bot_minplayers "0"

seta g_spSkill "4"

seta bot_enable "1"

You can set up bots with these values.  The bots know how to unfreeze teammates.  With minplayers, the system will make sure a certain total amount of people are playing.  If a human joins, then a bot will be removed.  When a human leaves, the bot will come back.  Set bot_enable to "0" if you do not use bots.  This will improve your server's performance as all of the bot libraries are not loaded.



seta sv_maxPing "0"

seta sv_minPing "0"

seta sv_maxRate "10000"

Perhaps you want players who have fast connections to only be allowed to play.



seta com_hunkMegs "56"

seta com_soundMegs "8"

seta com_zoneMegs "16"

These settings determine how much memory is taken away from the operating system and used for the server.  Setting hunkMegs higher than "128" is said to be pointless.  The listed settings are the default settings.



seta com_maxfps "85"

Even if someone connects with a super computer you can limit how fast their screen displays to possibly even the playing field for those with slower computers.



seta sv_floodProtect "1"

This should always be on.  Does not let people talk if they are flooding the server with comments too fast.



seta sv_master2 "master0.gamespy.com"

seta sv_master3 ""

seta sv_master4 ""

seta sv_master5 ""

These are the servers your server will contact so that their master list can let other players know your server exists.  Used with "set dedicated 2" mentioned above.



seta sv_allowDownload "1"

If you set sv_pure to "1" and leave this off, people without the Freeze .pk3 files will not be able to join, otherwise they can download within Quake3 the files they need from you.



seta wpflags "14"

This works just like dmflags and votelimit.  Pick what weapons you want people to start with on a respawn.  The weapon numbers are:



   Machinegun   1

   Shotgun   2

   Grenade Launcher   4

   Rocket Launcher   8

   Lightning Gun   16

   Railgun   32

   Plasma Gun   64

   BFG10K   128

   Nailgun   256

   Prox Launcher   512

   Chaingun   1024



If you wanted everyone to start with a Shotgun, Grenade Launcher, and Rocket Launcher, you'd add 2, 4, and 8 to get wpflags "14".  Players will always start with the Machinegun and Gauntlet as well.



seta weaponlimit "128"

Used to turn off or remove weapons and ammo types from maps.  Uses the same values as wpflags.  If you set to 1 then players will not start out with a machinegun.  Also, if nightmare dmflags mode is on and weaponlimit 2048 is used, the Gauntlet will not do super damage.



seta g_doReady "0"

If this is on then everyone must type "ready" for the level warmup to begin.  Great for clan matches.  You must have doWarmup (see above) set in order for this flag to work, naturally.  The scoreboard will show who has not typed "ready" in yet.



seta g_grapple "0"

Freeze comes with a simple grapple.  Turn it on here and then bind a key to "+button5" to use.  This grapple actually came with Quake3.  They did not have it on though to preserve map flow.



seta g_enableBreath "1"

This is also a client setting.  Turn on or off the breath puff you get from players because the arena air is so cold.  For ambiance.



seta g_startArmor "5"

Goes well with wpflags (see above).  Determines how much starting armor you respawn with.  Good for allowing the player to get a few "wake-up" hits before being frozen.



seta disable_item_quad "1"

You can turn off specific items.  Use their full name.  Some examples have been included.



An example map rotation list is included at the end.  Notice how you can switch gametypes back and forth from CTF to team deathmatch.





Female voice by Karla Palmer

Male voice and final production by Jeff "Tacos" Wros

Older sounds by Coal Shaft and Redder

Bot thaw AI by Fergus Dog

Code help from Neil "haste" Toronto



Freeze Tag is Copyright 1998, 2001, 2002 by Darrell Bircsak

http://www.planetquake.com/freeze

dbircsak@earthlink.net
« Last Edit: January 12, 2007, 09:07:41 PM by Fragjooski » Logged
subnet_rx
Nub


Cakes 0
Posts: 14


WWW
« Reply #3 on: January 12, 2007, 09:57:59 PM »

thanks, played some last night, going to try my luck more this weekend.
Logged

Pages: [1]
  Print  
 
Jump to: